u16d05c ? u16d60c 1 of 4 ? 2006 won-top electronics pb u16d05c ? u16d60c 16a glass passivated dual supefast rectifier features ! glass passivated die construction h ! super-fast switching ! low forward voltage drop ! low reverse leakage current s j ! high surge current capability ! plastic material has ul flammability r k classification 94v-o pin1 2 3 l p mechanical data n ! case: to-3p, molded plastic ! terminals: plated leads solderable per m mil-std-750, method 2026 a ! polarity: see diagram b ! weight: 5.6 grams (approx.) ! mounting position: any ! mounting torque: 11.5 cm-kg (10 in-lbs) max. c ! lead free: for rohs / lead free version, add ?-lf? suffix to part number, see page 4 pin 1 - + g d pin 3 - case, pin 2 e maximum ratings and electrical characteristics @t a =25c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol u16d 05c u16d 10c u16d 15c u16d 20c u16d 30c u16d 40c u16d 50c u16d 60c unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 150 200 300 400 500 600 v rms reverse voltage v r(rms) 35 70 105 140 210 280 350 420 v average rectified output current @t c = 100c i o 16 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 200 a forward voltage @i f = 8.0a v fm 0.975 1.3 1.7 v peak reverse current @t a = 25c at rated dc blocking voltage @t a = 100c i rm 10 500 a reverse recovery time (note 1) t rr 35 50 ns typical junction capacitance (note 2) c j 120 70 pf operating and storage temperature range t j , t stg -55 to +150 c note: 1. measured with if = 0.5a, ir = 1.0a, irr = 0.25a. see figure 5. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v d.c. wte power semiconductors to-3p dim min max a 3.20 3.50 b 4.70 5.30 c ? 23.00 d 19.00 ? e 2.80 3.20 g 0.45 0.85 h ? 16.20 j 1.70 2.70 k 3.15 ? 3.65 ? l ?4.50 m 5.25 5.65 n 1.10 1.40 p ?2.50 r 11.70 12.70 s 5.00 6.00 all dimensions in mm
u16d05c ? u16d60c 2 of 4 ? 2006 won-top electronics 50v dc approx 5 0 n i (non-inductive) w 10 ni w 1.0 ni w oscilloscope (note 1) pulse generator (note 2) device under test t rr se t tim e bas e fo r 5 /10 ns/cm +0.5a 0a -0.25a -1.0a notes: 1. rise time = 7.0ns max. input impedance = 1.0m , 22pf. 2. rise time = 10ns max. input impedance = 50 . w w fig. 5 reverse recovery time characteristic and test circuit (+) (+) (-) (-) 0 300 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60hz fig. 3 maximum non-repetitive surge current 8.3 ms single half-sine-wave jedec method 100 20 0 10 100 400 0.1 1.0 10 100 c , capacitance (pf) j v , reverse voltage (v) fig. 4 typical junction capacitance r t = 25 c f = 1.0mhz j u 16 d 50 c - u1 6 d 60 c 0 4 8 0 5 0 100 150 i , average forward current (a) (av) t , case temperature ( c ) fig. 1 forward current derating curve c 12 16 20 0.1 1.0 10 100 0 0 . 6 1. 2 1. 8 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fig. 2 typical forward characteristics f pulse width = 300 s 2% duty cycle m 05 c - 20 c 30 c - 40 c 50 c - 60c u 16 d 0 5 c - u1 6d 40 c
u16d05c ? u16d60c 3 of 4 ? 2006 won-top electronics marking information packaging information tube size l x w x h (mm) quantity (pcs) inner box size l x w x h (mm) quantity (pcs) carton size l x w x h (mm) quantity (pcs) approx. gross weight (kg) 505 x 46 x 6.5 30 520 x 145 x 95 1,200 540 x 306 x 115 2,400 18.0 recommended screw mounting arrangement note: 1. anti-static tube, water clear color. bulk u16dxxc = device number xx = 05, 10, 15, 20, 30, 40, 50 or 60 polarity = as marked on body plain washe r rectifie r insulato r heatsink 6-32 hex nut recommended isolated mounting when screw is at heatsink potential. 6-32 hardware is used. a conical washer should be used to apply proper force to the device. screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. the interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. 6-32 hex head scre w conical washe r u16dxxc
u16d05c ? u16d60c 4 of 4 ? 2006 won-top electronics ordering information product no. package type shipping quantity u16d05c to-3p 30 units/tube u16d10c to-3p 30 units/tube u16d15c to-3p 30 units/tube u16d20c to-3p 30 units/tube u16d30c to-3p 30 units/tube u16d40c to-3p 30 units/tube U16D50C to-3p 30 units/tube u16d60c to-3p 30 units/tube 1. shipping quantity given is for minimum packing quantity only. for minimum order quantity, please consult the sales department. 2. to order rohs / lead free version (with lead free finish), add ?-lf? suffix to part number above. for example, u16d05c-lf . won-top electronics co., ltd (wte) has checked all information carefully and believes it to be correct and accurate. however, w te cannot assume any responsibility for inaccuracies. furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. wte reserves the right to change any or all information herein without further notice. warning : do not use in life support equipment. wte power semiconductor products are not authorized for use as critical components in l ife support devices or systems without the express written approval. we power your everyday. won-top electronics co., ltd. no. 44 yu kang north 3rd road, chine chen dist., kaohsiung, taiwan phone: 886-7-822-5408 or 886-7-822-5410 fax: 886-7-822-5417 email: sales@wontop.com internet: http://www.wontop.com
|
